Ross Street House / RWH Design

Ross Street House / RWH Design - FacadeRoss Street House / RWH Design - Countertop, Sink, Table, ChairRoss Street House / RWH Design - WindowsRoss Street House / RWH Design - Sofa, Table, Windows, ChairRoss Street House / RWH Design - More Images+ 21

  • Architects: RWH Design
  • Area Area of this architecture project Area:  250
  • Year Completion year of this architecture project Year:  2009
  • Photographs
    Photographs:Zane Williams

Text description provided by the architects. Carol Richard, founding partner of the Atlanta-based architecture firm Richard Wittschiebe Hand, returned home to Madison, Wisconsin last summer to build her house. “When I was a young architect,” says Carol, “I designed and built a house for myself in Atlanta and I've always wanted to build again and take advantage of the things I've learned over my career.” Carol’s most recent design is a collaboration with her mechanical engineer husband, Fred Berg. Their residence, known as the Ross Street House, was recognized as Wisconsin’s first LEED for Homes Platinum rated residence in July 2009. The home has captured the attention of green enthusiasts throughout the country for far exceeding the requirements to achieve the highest LEED rating of Platinum.

Ross Street House / RWH Design - Lighting, Chair
© Zane Williams

The southfacing lot sits among a mix of houses in the Madison neighborhood of Glenway. Most of the homes are post world war Cape Cod in style with a few 1960’s modern homes. The designers felt that it was important to maintain the scale and utilize familiar materials from the neighborhood. Neighboring homes were modeled so that designers were comfortable with the scale and the way the house would fit into the eclectic neighborhood. As the couple’s retirement home, it was important to them to “be a good neighbor,” so an effort was made to meet their future neighbors and talk about the design of the house before construction.

lower level plan

The 2,700 square foot design is a simple form with cues taken from the southfacing lot. The southern facade was designed to capture as much of the winter southern sun as possible while shading the sun in the summertime. The concept of a box camera generated the form with the roof gently sloping from south to north. Sunlight that enters the home is controlled with fixed louvers attached outside the south facing windows. Computer modeling in ArchiCAD was utilized to study the amount of daylight that would enter the building during the winter and summer solstices. The louvers are designed to allow the sunlight to penetrate deep into the space between October and February while shading the windows between May and August.

main level plan

Primary exterior materials are 6” tongue and groove cedar siding with a metal roof. Cedar siding was selected for its similar scale and material to other houses along the street. A dark color for the siding and roof were chosen so that the house would appear smaller than it actually is. In contrast, the interior materials are very light in nature. Locally harvested maple and light colored walls make the inside of the house appear larger than it is.

Ross Street House / RWH Design - Table, Sofa, Windows, Lighting, Countertop, Chair
© Zane Williams

The main level is an open plan with service elements on the west side and living spaces on the east side. An open stair visually connects all three floors and is anchored by a three-story high wall. The upper level has a study opening onto the living room and a master bedroom suite. The lower level has additional bedrooms, a beer making room, storage, and a workroom.

Ross Street House / RWH Design - Stairs, Chair, Handrail
© Zane Williams

Water conservation efforts include dual-flush toilets, low-flow faucets, a tankless water heater, and a rain water retention system for garden irrigation. Volatile organic compound (VOC)-free paints and adhesives were used to limit the unhealthy off-gassing commonly found in conventional American homes. The detached garage is topped with photovoltaic panels that generate enough electricity to offset more than half of the annual demand.

west elevation

The house was designed to minimize air infiltration to less than 1 air change per hour through the incorporation of spray foam insulation and the careful sealing of all doors and windows. Forced ventilation is necessary to provide healthy air in the house. This is accomplished efficiently by using an energy recovery ventilation system and incorporates a 3-stage high efficiency furnace.

Ross Street House / RWH Design - Windows, Facade, Garden, Courtyard
© Zane Williams

Outside the home, the front and back yards are transformed into garden spaces. An overall incorporation of native perennial plants and no turf grass make the yard low-maintenance. A rain garden and vegetable garden are located in the back yard next to the detached garage. A rainwater collection and retention system that stores 650-gallons of water is stored below the back porch. Pervious paving and limited impervious hardscaping for the driveway and walkways were used.

section diagram

Project gallery

See allShow less
About this office
Cite: "Ross Street House / RWH Design" 26 Jan 2010. ArchDaily. Accessed . <https://www.archdaily.com/47353/ross-street-house-rwh-design> ISSN 0719-8884

You've started following your first account!

Did you know?

You'll now receive updates based on what you follow! Personalize your stream and start following your favorite authors, offices and users.